|
|
Free-Space Optics data link
Šála, Jakub ; Číž, Radim (referee) ; Šporik, Jan (advisor)
In this thesis, shows a current issue for free space optics, limiting their use in practice with regard to the availability and reliability. They conducted measurements on wireless optical links and the observed values is calculated by the availability of the connection. Subsequently, measurements are performed on alternate versions of wireless and copper connections. Observed values were compared with a wireless optical link. It is made of optical design of wireless connections at home.
|
|
|
The transmission speed enhancement techniques in TKR
Šťovíček, Petr ; Křepelka, Václav (referee) ; Filka, Miloslav (advisor)
The purpose of this work is to assess and propose possible methods for increasing the transmission speed of the cable television distribution, concretely the UPC network in Brno. The first part of work collectively processes general knowledge and gives the reader into the issue. After that follows an analysis of TV cable networks UPC in Brno, especially view of data transmission. After familiarization with the physical aspect of the network is described data communications itself, including standard DOCSIS, respectively EuroDOCSIS. Particular attention is paid to factors that have effect on data transmission and speed. Benefit is the calculation of dividing ratio in different parts of the network and compared with the real load. As far as possible in the given work results of measurements with regard to the quality of the network. The last part is about how to increase speeds. Perspective solution is mainly a technology which is based on standard EuroDOCSIS 3.0, which introduces the concatenation of individual channels. Result of made tests of first cable modem EuroDOCSIS 3.0 confirms the very high speeds and currently preparedness for other major step in so long development of TV cable network.
|
|
|
Multimedia support of the course BSIS
Pasečný, Jan ; Šebesta, Vladimír (referee) ; Sigmund, Milan (advisor)
This paper takes aim at creating a consistent form of study materials, supplemented with illustrative examples, for Signals and systems subject. The thesis starts with basic characteristics of acoustic, image, biological and communication signals. Characteristics of linear signals and AD&DA conversion has been added to the next part and to complete the submission, discrete signals follow. Diploma thesis as a whole contains basic theoretical description of problematics, which it tries to supplement with interesting examples, connections, graphs and matlab scripts for illustrative presentation of mentioned problematics.
|
|
|
Digital Signal Processor for Handheld RFID Reader
Benetka, Miroslav ; Zamazal, Michal (referee) ; Šebesta, Jiří (advisor)
This diploma thesis deals with design and realization of a module for a digital signal procesor, for handheld RFID reader working in UHF band. It utilises a special chip EM4298 for RFID signals processing. Module is controlled by the microcontroller ATmega32L, which communicates with the PC through USB bus. Settings in EM4298 is made by a service program which processes received identifying data obtained from tags. Source codes for microcontroller are created in AVR Studio 4.13 program. Source codes for microcontroller are created in C++ Builder 6.0 program. Further thing is Desing and realization of analog interface and a UHF transceiver for wireless communication with tags. A Webench program was used for the analog interface design, which is freely available on the internet. For verification of parameters of the analog interface it was used PSpice 10.0 program. The UHF transceiver is build-up with a MAX2903 chip (transmitter) and AD8347 (receiver) and transmitting and receiving antennae.
|
|
|
Verification of Properties of WiFi IEEE 802.11n
Alexa, Jan ; Miloš, Jiří (referee) ; Kuder, Zenon (advisor)
This bachelor thesis is focused on introducing with WiFi standard – IEEE 802.11 in general. A deeper focus is devoted to modern standards 'n' and 'c', showing the main differences and innovation compared to older standards 'b', 'g', 'a'. Furthermore, this work focuses on the use of MIMO technology. The last part is devoted to the design of laboratory tasks for teaching at the undergraduate level, which demonstrates the use of MIMO technology. Part of this thesis is an application that demonstrates the differences between those standards.
|
|
|
Quality of services and experience qualify for next generation networks
Vaněk, Jiří ; Horváth, Tomáš (referee) ; Grenar, David (advisor)
The thesis sums up the traffic parameters for the evaluation of next-generation access networks. There are mentioned parameters for service quality management and parameters for measuring the quality of experience. The EU regulation on High Speed Internet in the Czech Republic is analyzed. The practical part compares the results between the implementation of the quality management of services and without implementation. Also there is comparing theoretical and practical transmission rates of physical ports. Part of the thesis is a questionnaire focused on the quality of experience of the video sequence.
|
|
|
Optical cabling - a comparison
Zelinková, Vlasta ; Křepelka, Václav (referee) ; Filka, Miloslav (advisor)
The thesis is focused on an analysis of mounting and cable laying fiber optic lines. The first chapter includes an analysis is made comparing parameters fiber and copper cabling, mainly in terms of access networks. This part specifies the various transmission media and access networks that are operated on them. Attention is focused on the transmission rate and its possible impact, provided the capacity and other important values. This section also demands site maintenance, service, or any failure on the routes of these networks. With this goal in the second chapter was created several designs networks that provide insight into possible solutions to the situation for emerging networks, and for upgrading existing networks, using both management and elements of optical and copper, or combinations thereof. Provide information from expert sources and verified directs the work of the future and to clarify further the eventual development of individual technologies. Most other space and offers the potential of optical technology, nature, and therefore the third chapter is fully devoted to only the transmission medium. At the beginning of this section is a theoretical analysis of possible ways of cable laying fiber optic cabling with a comparison of advantages and disadvantages. The most stable is an underground installation, which is costly in standard cases. As a result of these factors proved to be a possible solution using the underground installation of water pipeline shutdown. Therefore, the optical path designed, organized and implemented laying of fiber optic cable. By completing the inspection measurement and evaluation of the cost compared with other ways of installing fiber optic cable.
|
|
|
Wireless communication link analyzer
Dostálek, Jakub ; Burian, František (referee) ; Jílek, Tomáš (advisor)
The aim of this bachelor thesis is to design and implement a wireless communication analyzer in mobile robotics, using IPv4 protocol and Ethernet interface and to create correctly selected and expressed characteristics from the measured data, according to which the wireless communication channel can be further optimized for the best data transmission. To meet these requirements, a brief search of existing solutions was performed, their applicability was discussed and important parameters of the wireless transmission channel were defined, which will form the given characteristics. Furthermore, the actual design and implementation of a wireless communication link analyzer for previously specified required parameters, verification of its functionality on the transmission link with known parameters and automation of measurement and data evaluation was performed.
|
|
|
Data transmission in mobile networks
Bílek, Petr ; Molnár, Karol (referee) ; Havelka, Dušan (advisor)
The Bachelor’s thesis deals with mapping and usage of mobile networks of data transfers. It describes every particular generation of networks and technologies that they can use. This thesis is divided into two main parts, theological and practical. In the first part, the technologies of the second and third generation currently used for data transfer in mobile networks are described there. This concerns especially GPRS, EDGE and UMTS services. The thesis focuses on modulations used for these technologies, together with the coding and bit rates possible. It compares their advantages and disadvantages and presents their utilization among national operators. It also tries to sketch out the way the data services of mobile networks will proceed. The second part of the thesis is also divided into two parts. The first one is the simulation of the UMTS network with the assistance of the OPNET Modeller 14.5 environment. In this case, the thesis aims at two important characteristics - such as the dependence on the bit rate and distance of the primary station, and dependence on the bit rate and total load of the whole network. Both characteristics are observed mainly because of the bit rate and power characteristics. It describes objects and funcions of the OPNET environment. The next part in the practical section is the factual measurement of the Internet 4G service, provided by T-Mobile operator. The thesis focuses here on the presentation of the outcomes which were accomplished by the practical measurement of that service. The end of this thesis is dedicated to the comparasion of simulated outcomes with the outcomes practically measured, and to the conclusion of the results emerged from them.
|
|
|
Net for communication in a company
Sychra, Jakub ; Vaněk, Jiří (referee) ; Špinka, Jiří (advisor)
This work deals with accessible communications technologies and their possible usage in firms. It is necessary to have a survey about types and trends of communications technologies at proposal of communications network. It is important to choose the combination that is suitable with its reliability, achievement and price.
|
guest ::
